Completed 30th Regt. the Alma - Crimea 1854 a try at 54mm

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Marco22

A Fixture
Joined
Nov 18, 2012
Messages
628
Location
St Germain en Laye France
hi
If you havn't noticed, I mostly paint 75mm fig.

So it was a good challenge for me to give it a try at this famous Latorre Fig - a 54 mm.
I know it has been seen quite a lot before !

Painted completely with oils.
I had some problems with the bue (a repeat pb with blue ) which kept having some shinning with it. I solved the problem adding some Indigo blue which dries with a better flat finish.

comments welcome ! :whistle:

IMG_9753_zps33a155cc.jpg
IMG_9752_zps67c6e979.jpg
IMG_9751_zps7659b3ea.jpg
IMG_9754_zps493c6223.jpg
IMG_9749_zpsc4c2b47b.jpg
IMG_9740_zps0725de64.jpg




thanks for watching

Marc
 
Great work.
As far as avoiding shining of the blue I work as follow.
On a indexcard I put a blob of the blue oilpaint. Let it soak out the oil for about 15 minutes and put it then on my palette.
After the paintingsession the figure goes into a drybox (wooden box of 30x30x30 cm with a 60 W lightbulb).
The next morning the blue is as flat as you wanted.

Marc
 
Marc , your troubles were worth it - this is super.
Blue oil paint is every painter's nightmare.
Inigo is a good way round, it does dry more matte that any other .
I use Vallejo Dark Prussia Blue as a bse coat, then add Indigo over that, highlighting with Titianium white...
 
Great job Marco. The braiding in that scale can't be easy but you've pulled it off.

For medium blues similar to that, I use MIG Abteilung 502 "faded navy blue" straight out of the tube to shade whatever acrylic blue base I've used. It dries dead flat every time.

- Steve
 
Back
Top