WIP "Lucky Jack" The Euro demo that never happend.

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blabsy

PlanetFigure Supporter
Joined
Sep 28, 2006
Messages
543
Location
Rochester Kent, England.
Hi All,
I was going to do a demo at Euro Millitare, it was in the programe as well,but sadly no! so here it is.....
all undercoat at moment Humbrols/acrylic
Best Regards
Paul
 

Attachments

  • CIMG2082.JPG
    CIMG2082.JPG
    53 KB
  • CIMG2081.JPG
    CIMG2081.JPG
    51.1 KB
  • CIMG2085.JPG
    CIMG2085.JPG
    47.7 KB
  • CIMG2083.JPG
    CIMG2083.JPG
    76.5 KB
  • CIMG2094.JPG
    CIMG2094.JPG
    54.6 KB
  • CIMG2095.JPG
    CIMG2095.JPG
    57.5 KB
  • CIMG2096.JPG
    CIMG2096.JPG
    73 KB
Hi All,
thanks for your comments and for looking,
if I was honest an hour slot at Euro would not be long enough,as this may look a little long winded and is.
To paint to a fair level it takes one hell of a lot of time,that in it self for me, at least is a problem I get very little of it,any way I hope give you some ideas in a "not teaching granny to suck eggs" kind of way,I think mostly all have darn good idea how to paint!!!!
Colours are all oils
next post I'll list them,but I've added a snap of the pallet I worked off of.
Best Regards
Paul
 

Attachments

  • CIMG2100.JPG
    CIMG2100.JPG
    57.6 KB
  • CIMG2101.JPG
    CIMG2101.JPG
    54.3 KB
  • CIMG2108.JPG
    CIMG2108.JPG
    55.4 KB
  • CIMG2109.JPG
    CIMG2109.JPG
    57.2 KB
  • CIMG2113.JPG
    CIMG2113.JPG
    52.7 KB
  • CIMG2116.JPG
    CIMG2116.JPG
    105.8 KB
  • CIMG2115.JPG
    CIMG2115.JPG
    55.2 KB
  • CIMG2111.JPG
    CIMG2111.JPG
    54.9 KB
  • CIMG2110.JPG
    CIMG2110.JPG
    59.1 KB
  • CIMG2118.JPG
    CIMG2118.JPG
    101.1 KB
  • CIMG2120.JPG
    CIMG2120.JPG
    97.1 KB
  • CIMG2131.JPG
    CIMG2131.JPG
    60 KB
  • CIMG2121.JPG
    CIMG2121.JPG
    158.5 KB
  • CIMG2117.JPG
    CIMG2117.JPG
    106.3 KB
Hi,
Sorry for the delay;
Oil Colours were,
venetian red,cadmium red deep,flake white,sap green,burnt umber,this was the base coat pinky red.
applied and removed to leave a film,then I started adding cadmium red deep/lamp black in differant shades darker in the eye socket and more red on the cheeks.
Under the chin and 5 o'clock shaddow was a mix of lamp black and naples yellow all softened out with a no4 pro art series 6 squirrel brush.
To tidy up and highlight naples yellow was used,later on when dry flake white was added for a few tiny areas to bring them out nose/chin/eye wrinkles so on.

Hope this helps Gordy.....(y)

Rob thanks' for the comments and for looking.
Best regards
Paul
 
Hi all,
not managed much since last post,but painted the felt of the hat,painted in oils
sepia,lamp black,naples yellow,when it was fully dry I flattened it off with a coat Testors flat coat.
as always thanks for looking
Best Regards
Paul
 

Attachments

  • CIMG2132.JPG
    CIMG2132.JPG
    68.8 KB
Hi Paul, thanks for taking the time to do this SBS, I'll be following with interest as you know from our conversation at Euro, especially where the metallics are concerned.
One question, what was your enamel base coat for the face?

Keith
 
Hi Keith,
sorry mate bit slack with a responce,the Humbrols were flesh when that was all dry,I mixed flesh/wine and shaded the eye sockets, cheeks,under the chin and eye bag, I added a little black to the mix.
Best Regards
Paul
 
Hi All,
bit of an update,
painted the waist coat vallejo buff 976 to block out first, left over night to dry,then shaded with naural wood/black and white all Humbrols,also blocked out and pre shaded the jacket in oxford blue/black, base.
Highlight with a little natural wood in the mix.
Best Regards
Paul
 

Attachments

  • CIMG2158.JPG
    CIMG2158.JPG
    135 KB
  • CIMG2151.JPG
    CIMG2151.JPG
    140.8 KB
  • CIMG2133.JPG
    CIMG2133.JPG
    107.8 KB
Hi All,
wee bit more work done on the jacket,this is an oil glaze (oil thinned with white spirite,applied as a controled wash,then shaded),colours were indigo blue/lamp black/naples yellow.
Thanks for looking as always.
Best Regards
Paul
P.S. it was dried off with a hair dryer.
 

Attachments

  • CIMG2161.JPG
    CIMG2161.JPG
    112.6 KB
  • CIMG2163.JPG
    CIMG2163.JPG
    115.3 KB
  • CIMG2164.JPG
    CIMG2164.JPG
    123.3 KB
  • CIMG2165.JPG
    CIMG2165.JPG
    125 KB
  • CIMG2166.JPG
    CIMG2166.JPG
    129.9 KB
  • CIMG2167.JPG
    CIMG2167.JPG
    122.5 KB
  • CIMG2168.JPG
    CIMG2168.JPG
    125.5 KB
  • CIMG2170.JPG
    CIMG2170.JPG
    113.9 KB
  • CIMG2171.JPG
    CIMG2171.JPG
    104.4 KB
  • CIMG2174.JPG
    CIMG2174.JPG
    105.6 KB
  • CIMG2172.JPG
    CIMG2172.JPG
    133 KB
Hi All,
I've painted,shaded and highlighted the shoulder boards// Revell email color matt No17 as the base,then shaded with Humbrol natural wood No 110/black No 33,highlighted with tan 148.
NO METALIC'S ADDED YET THAT'LL BE NEXT.......
I used these colours for the hair too by the way.
I popped the head on as you can see for good measure,makes me feel I'm getting some where at last.
As per thanks' all for looking!
Best Regards
Paul
www.paulblaber1.moonfruit.com (this has had bit of an update)
 

Attachments

  • CIMG2199.JPG
    CIMG2199.JPG
    86.7 KB
  • CIMG2192.JPG
    CIMG2192.JPG
    78.9 KB
  • CIMG2193.JPG
    CIMG2193.JPG
    77.8 KB
  • CIMG2194.JPG
    CIMG2194.JPG
    82.5 KB
  • CIMG2198.JPG
    CIMG2198.JPG
    154.4 KB
Hi All again,
had a day off today, so had a bit more time with this chap, its not too far off a done job......
Any way my thoughts on gold lace.....................by no means the, be all and end all,just my way of painting it.
I've done the shading and highlighting with enammels,now with Humbrol gloss varnish as a carrier a tiny dot of printers ink gold, the one I use ,it has a very fine pigment, any way,so with this on the pallet I add lot's of white spirit and thin till its totaly transparent,I apply this and allow it to dry on the lace.
I added a dot of poppy oil to the original mix to make the particals ping to the surface and then I painted the buttons see photo.
SHADING IT NEXT
Best Regards
Paul
www.paulblaber1.moonfruit.com
 

Attachments

  • CIMG2214.JPG
    CIMG2214.JPG
    94.6 KB
  • CIMG2217.JPG
    CIMG2217.JPG
    124.3 KB
  • CIMG2220.JPG
    CIMG2220.JPG
    125.1 KB
  • CIMG2219.JPG
    CIMG2219.JPG
    84 KB
Hi All,
ok shading the lace/shoulder boards,sorry to keep it till now,I used a citadel wash from games workshop called devlan mud to tone the sparkle away.
It dont leave a big impact but subtle effect.
Thanks for looking
Best Regards
Paul
www.paulblaber1.moonfruit.com
 

Attachments

  • CIMG2224.JPG
    CIMG2224.JPG
    77.6 KB
  • CIMG2226.JPG
    CIMG2226.JPG
    76.9 KB

Latest posts

Back
Top