Review 1:16 Kettenkrad Crewmember Xion

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FlaBtl (Sfl) 606

Well-Known Member
Joined
Jul 23, 2019
Messages
297
Location
Nürnberg
A little review to the 1:16 / 120mm Kettenkrad crewmember from Xion (https://shop.xion.de/index.php). Originally made for there 1:16 RC Kettenkrad.

8ab548ff-7877-4ca2-9d24-8e46d6ac2260.jpg
937d7bf9-dcff-42c2-8b12-16991cfbbf2f.jpg
995ab5c8-3558-4956-b628-486b1fbf84f9.jpg
ab66b331-fa3d-44d0-bec9-579534ab5de3.jpg
544fbbb4-cbc7-46be-8ca3-2c5fad6db606.jpg
ae5fa7da-c03c-4f1a-bb30-391e586cb692.jpg
a2059871-a146-49f2-8280-5174d876700b.jpg
0d2384d8-6ed9-4672-81bc-7f5e13b83422.jpg
330b2940-761e-489d-9ad1-f58417762923.jpg
a7b1b5a6-cb11-4969-91cf-d976a8b40747.jpg
518b0f69-4e00-4cc8-99b2-4b919de0c2c0.jpg
71b85f10-4791-4f96-8c62-0f50944b18ee.jpg
3ffccac0-fc52-42b1-b5b7-f407ff1663c1.jpg
 
Not the worst that I have seen but still some annoying issues that given the standards and quality of sculpting and casting from other manufactures today could have been sorted out before release, however the worst things are the duff eye and lack of detail.
TERRY
 
Please have in mind that the figure is from 2008. And I personally like the fact that the breasteagle is "flat" that you can use a decal or pe part. The eagle on the hat is inded bad ... but can be changed :)
 
Have to agree with Smithy, not a lot of detail but some heavy and large stubs to remove and cast lines.


Agree there Steve , think those stubs will take a lot to remove safely especially the head , on this scale I would look for much more sharper detail

But sure there are worse and with work this will be a useful figure

As Scott says "boy things have improved" ....too right !

Thanks for the review

Nap
 
Back
Top