advice on oil painting

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

godfather

Well-Known Member
Joined
Feb 23, 2004
Messages
393
Location
Vancouver, Canada
I usually paint using the wet on wet technique. I am finding that when I lay down my shadow colour and go to smooth/ blend it I remove most of it, leaving a very faint shadow. Am I not allowing enough time for it to partially dry? Related question any techniques for using oil to shade/highlight acrylic painted figures. I am finding that the oil does not blend very easily (obviously ;) should I be mixing it with some linseed etc to help the flow?
 
Hello there Bruno,
I also use the wet on wet technique. What i usually do is to apply my middle tone and then i'm trying to wipe it as much as i can, leaving a very thin layer of oil. I then put the shadows and start blending. I don't know the way you do the blending but i actually softly tapping the brush where shadow and middle color meets. That gives me a nice transmission between shadow and middle color. The same think i do with my lights. I also apply extreme shadows and highlights when the oil is almost dry, to give a better 3d look.
I hope that this may help.
 
Hi Bruno,
Here's a link to the article Keith mentioned...
Article
Thanks for the plug Keith :lol:
I hope it helps you Bruno. If there are any questions you have about it, just let me know. I'd be happy to try and help.
Cheers,
Craig
 
You are welcome, Craig. All your articles and dry box have been a big help to me.
I especially found the brief videos helpful. There really is no substitute for seeing things done, IMO.

Bruno- There was also a very helpful article on oil face painting from Gino Poppe and another overall guide from the BMS. I don't have those links anymore, though. I'll see if I kept a hard copy...

Keith
 
Bruno,
The mpeg's are found on page 3 under the section titled "Stippling". At least, that's where they are if you're looking at the article while on ArmormA. If you've downloaded the article I don't know if they would still show up or not. But I doubt it. And I don't think they can be saved to your machine.
Craig
 
Craig,

your article lays always next to me when i am painting. They are a tremendous help for the oilpainting.
The drybox you have explained is also a real help, not to forget the transport box.
Thankx Craig, your a great help for the figure community.

Marc
 
Back
Top