For Sale Hard wood burrs

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ron Tamburrini

A Fixture
Joined
May 29, 2011
Messages
6,463
Location
Glasgow
Some new stock burr Elm and Oak
IMG_8637.JPG In the raw IMG_8293.JPG Polished

IMG_8640.JPG Raw IMG_8649.JPG Polished
IMG_8643.JPG For more Classic Finish " Bocote ,Sapele and a bit of burr"

Grange hardwood bases

Ron
 
hi ron looking for something with a working area of about 45-50mm square with a good burr edge

Hi Steve how are you ,well I trust.

do you mean a waney edge as in bark left on at the edge
IMG_8659.JPG IMG_8662.JPG IMG_8665.JPG IMG_8673.JPG
IMG_8677.JPG Some of these can be modified ,IE plinth base in black at the bottom ,Profiled edge on top ,fourth from the left straight face on part of it ad profile added ,or i might be able to cut you something from the workshop photo;s

Ron
 

Attachments

  • IMG_8671.JPG
    IMG_8671.JPG
    1.1 MB
hi ron like the look of the first one what's the workin area on the second one and the one in the attached file might have them too

First one is 55x60 if you count the waney edge it has been hiding in my private stash but just got to let some go :(
the second one ,the flat surface is 5omm wide and tapers from the back to front 55mm on the right to 40mm on the left before falling off to the waney edge. the Oak in the attached file is 70x60mm to the tapered front ,would suit an indian or similar :)
 
Back
Top