Horse painting SBS part II

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Think he used blue black , back to the green horse ; If you use raw umber as your base and yellow for highlights you get an olive green horse :D but im sure you found that out the same way as me :)
 
Little update.
Finished the sheepskin shabraque , added a blaze to the horse head and some work to the eyes reins and head harness , horse shoes and a minor fix to the rear right leg fetlock and stocking and I will call this done .

IMG_2712.JPG IMG_2715.JPG IMG_2718.JPG
 
Think he used blue black , back to the green horse ; If you use raw umber as your base and yellow for highlights you get an olive green horse :D but im sure you found that out the same way as me :)

My experience was rather strange....it was an airbrush piece....can only assume there was some kind of reaction between 2 varieties of acrylics (Scale 75/Vallejo)....always a surprise waiting around the corner in this hobby! :arghh:

Nice update....looking mighty fine (y)
 
That looks very nice Ron. Thanks for the SBS.

I have a rather basic question as a non-oils painter....what size and type brush did you use for this work?

Thanks,
Adrian
 
Adrian
I use mainly 8-10 filberts for application and lifting off , also a bit of foam ,and I will go down to a zero for detail re head harness
and a couple of makeup blushers .
IMG_2417.JPG Although the pic shows only two filberts I would probably use about six , changing to fresh ones as the become saturated with oil in the lifting off of the paint . The use of the bit of foam helps reduce the number of brushes as you get a lot of the paint off quickly .

Part I shows more detail of the process
 
Great job on this SBS Ron - very educational for everyone. Looking forward to seeing more soon.

Cheers

Huw
 
Ron, thanks for this sbs and part 1, You have covered brown & white horses, but what colour paints would you use for a black horse?


Kevin
 
Now you are asking :D

I would use a mix of Mars black and Burnt umber about 75-25% on the black side , but remember this is oils so the mix is not precise and some variation would occur when I started applying the paint to the model and just go with the flow .
I have four blacks I use . Ivory, Mars, Lamp and blue black , you have to be careful with the latter though ; only a very little goes miles so just a touch for the main and tail
 
Thanks for the info Ron, So you still use the sand undercoat to start ? and what about highlighting the horse, what do add to the base colour?


Kevin
 
Back
Top