horse

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Serega - molodca!!!
Fine model a skeleton of a horse and competent.
I already occupy turn - me two skeletons please.
Yours faithfully.(y)
 
Dear Sergey,

fascinating stuff. Is the horse skeleton in production?


Rgds Victor
 
Oh wow! That is sooo cool!(y) And I second Victor's question. Is it something that can be ordered?
 
Notice of response did not reach
Photo here in the analysis

http://s58.radikal.ru/i159/1108/59/c0b46f18c26e.jpg






Conceived as a designer, so that any position is possible to fashion, all the bones separately. But first, he wanted to try to blind, so that the production and implementation of these designers have not yet planned, the more of packing and price. But if there are willing, on the model of the skeleton, I'm ready to run in proizvodtvo). Nevertheless, the model has a sketchy image (the edges of an array), that is, it can hardly be attributed to the complete skeleton of a model more like a mannequin
scale 1 / 30, 54 mm eye on figures. Why is not 1 / 32, came from the logic that the crown is about 54mm 60mm, ie 1800mm rise and then goes a bit too much)

Óâåäîìëåíèå îá îòâåòå íå äîøëî
Çäåñü ôîòî â ðàçáîðå
http://s58.radikal.ru/i159/1108/59/c0b46f18c26e.jpg



Çàäóìûâàëñÿ êàê êîíñòðóêòîð, òàê ÷òî ëþáóþ ïîçó ìîæíî âûëåïèòü, âñå êîñòî÷êè îòäåëüíî. Íî äëÿ íà÷àëà õîòåë ñàì ïîïðîáîâàòü ñëåïèòü, òàê ÷òî î ïðîèçâîäñòâå è ðåàëèçàöèè ýòèõ êîíñòðóêòîðîâ ïîêà íå ïëàíèðîâàë, òåì áîëåå îá óïàêîâêå è öåíå. Íî åñëè åñòü æåëàþùèå, íà ýòó ìîäåëü ñêåëåòà, ÿ ãîòîâ çàïóñòèòü â ïðîèçâîäòâî ). Íî âñå æå ìîäåëü èìååò ñõåìàòè÷íûé îáëèê(ðåáðà îäíèì ìàññèâîì), òî åñòü åãî âðÿä ëè ìîæíî îòíåñòè ê ïîëíîöåííîé ìîäåëè ñêåëåòà ñêîðåå êàê ìàíåêåí
ìàñøòàá 1/30, 54 ìì ïî ãëàçà ôèãóðêè. Ïî÷åìó íå 1/32, èñõîäèë èç òîé ëîãèêè, ÷òî ïî ìàêóøêó 54ìì ýòî îêîëî 60ìì, òî åñòü ðîñò 1800ìì è òî ìíîãîâàòî âûõîäèò )
 
Dear Sergey,

I understand from you that this is still very much in the design stage and if there is sufficient demand, it could be put into production.

I would think the majority of figure modellers like to play around with a mannequin. Still, there must be a group who would be interested in a horse skeleton for "dry gulch" type scenarios...:).

Perhaps you may wish to finalise the scale, the most popular being 1/32.

I wish you well with this, a very unique idea.

Rgds Victor
 
I'm having a hard time understanding but I'm hoping this will be a mannequin.

If it is, I would definitely purchase one. As to scale, 1/32 would be much better as anything "off-scale" would be difficult to use and adapt. On the other hand, it is good to remember the artist will add muscling, flesh and hoof. So it needs to have a little room for work in that regard.

Victor is correct in pointing out that bones would be useful in certain diorama situations. Although I don't know if I would be in the market for something like that, one never knows, and it would be an interesting prop.

I'm still hoping for the mannequin though. ;) Sorry that I'm not quite getting it - but I'm trying. :D

Cheers,
Karrie
 
Hello
I'm sorry, I do not get a notification that the replies come :(
Therefore it is not immediately apparent.

The forms are ready and everyone can order the casting right now. The photo shows already cast in resin and the bones of them you can collect any position horse, on a scale of 1 / 30 scale but not a problem if the set will be in demand, I have other sets of fabrication on any scale. This is only the beginning of the project, so all in front ;).
The only thing I find it difficult to determine the price to not work out very expensive and so as to justify all costs a lot details.
Only to create the future poses a horse you have to glue together the bones of super glue on the above photo, all bones are glued together with superglue, you can use wire for stiffness, for this fastening in place of the bones to make a small hole and minisverlom on that and other bone and seal, for strength adding glue, it will give strength dummy.

Sincerely, Sergey
 
I want to warn again, this is not a full skeleton, but rather sketchy mannequin whose sole job is to manufacture (molding) of the figure horse in any pose, so it can not be considered an anatomical textbook "skeleton horse", it's just sketchy mannequin to help beginners modeller to fashion a particular figure in any pose. I think it has to do podnobnye massive skeleton mannequins for human figures.
 
Okay I think I have it now. The piece is 1/30 scale and designed to be a mannequin therefore the skeletal structure is not 100% accurate/perfect but more than enough to be a good mannequin.

The bones you can put in position but they need to be glued together or secured in some fashion so the mannequin is sturdy.

Does this mean I will have to assemble the bones or cut them off a sprue and put them together? If so, are instructions included? I'm very familiar with the horse in general and could probably get close but I'm not a veterinarian either :lol:. Assembly is no problem as long as I have some basic instructions to follow.

Price has not yet been determined. Well, I would love to order one, so how do I do that? And price - extremely broke artist over here (husband lost his job so we are really struggling)! :D Plus shipping to the States....plus it depends on the country and the current exchange rate. Tf the currency is doing better than the dollar, that makes it more expensive for me. Yes, you need to make money in this venture but the lower the price the more likely it is I'll be able to order one.

So if you could let me know how to do that, and the price, I'd love to get one if I can.

Other scales are in process - I will definitely be watching for them!

Thank you Sergey!

Cheers,
Karrie
 
Hi!
Sorry, I use google translator, it may not all translate well (.
I think the price of this conditional skeleton horse $ 20. But the difficulty is that the payment to Russia is possible only through Western Union.
 
desSergey said:
Hi!
Sorry, I use google translator, it may not all translate well (.
I think the price of this conditional skeleton horse $ 20. But the difficulty is that the payment to Russia is possible only through Western Union.
Click to expand...

No worries! Google translator may not be perfect but it's better than nothing. Okay, so you have $20 USD written above - if that's correct, then I can get one.

And wow! I just checked the conversion rate on the Ruble - you'd almost be paying me to buy it at what it is now. Holy mackerel! :eek:

If it's 20 Euro, then I'll have to hold off for a bit but just a couple of weeks But I really, really don't like sending money through Western Union. Soga Miniatures is in Russia isn't it? I purchased from Dmitri not long ago and paid through Paypal just fine. Arrived pretty quickly considering it had to go through customs and all that. It was a flawless transaction.

Anyways, still very interested in getting one. If you want to PM me with the ordering details, that's fine with me. :D

Edited to add - correction! My mistake! I paid Soga Miniatures through CCNow not Paypal. Still a wonderful transaction. :)
 
According to my information Paypal does not work with sellers from Russia :(, that is, from Russia through Paypal you can then buy that, but I get paid - no.
Although I probably outdated information.
 
Sorry! I just corrected my post as I made a mistake. You were probably in the middle of replying to it when I made the correction.

It was CCNow, I paid through not paypal. Sorry! :D I don't know the details of CCNow but it may be worth exploring.
 
Hi</SPAN> Karrie

I will try to find out about CCNow.
The cost of posting to get 100 grams of about 6-7 $, Up to 500 grams - about $ 9.
</SPAN><O:pWrite to </SPAN>my e-mail, conferencing ;)</SPAN><O:p
 
Hi Sergey, did you find out about CC Now? I'm sorry I missed this, but I still would love to get one of these. I will try to find your email. I may resort to send you a PM on this message board. ;) But I'll look around and see.

Cheers,
Karrie
 
Hi, Karrie
Pardon me, that just do not answer, I received a letter from you, but did not know that they came from, so as not received notice, and soon I will answer all who wrote me in PM
 

Similar threads

Ryan_bg
Articulated Skeleton, GS Miniatures
Replies
19
Views
1K
Ryan_bg
Ryan_bg
Paco
News Alabarda Association
Replies
8
Views
1K
BRAN
BRAN
master
Sculpting to order
Replies
5
Views
728
master
master
Horyminiart
Horse archer
Replies
7
Views
2K
Nap
Nap
CHRONOS
News February 2024: Chronos Miniatures CHM-54242(Z) - mirrored
Replies
2
Views
534
Nap
Nap

Latest posts

Back
Top