Paper Halberds

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul

Well-Known Member
Joined
Mar 6, 2011
Messages
465
Location
Germany
Strange how things happen sometimes. I was painting up the Miniarts Swiss infantry and I wanted to add a few halberds to the mix. The ones that come with the set, like the pikes provided...are in a word..crap.
If you want to use them you have to fit them with a "collar/sleeve" affair which doesn´t really hold...and looks bloody awefull. I treid to weld the halberd heads onto the floris wire but no joy.
Anyway..I came up with a solution and got on with it, and at the same time, did Will from Will´s Wargames!!!
The same idea!! :-D


This is my solution.
First the stuff needed. Normal Paper, a length of Forist wire 0.5mm, a sharp blade, some wood glue and some liquid plastic glue Fold a bit of paper, open it up and smear with woodglue. Lay the florist wire on the paper. I´ve found the maximum length of wire than should be glued in is 0.5cm´s...any longer and it looks a bit daft. When fully dried, use the sharp blade to cut out a halberd shaped head. When you´ve got the right shape and size, soak the head in liquid plastic glue. This (like with the toiletpaper cloaks) makes the paper turn virtually into plastic, and when that´s fully dried you can shave any little bits off as you please Attach to the bods and paint.
1180866730410451796-5595064233953805375



More...
 
Back
Top