Completed Critique Pegaso Mounted Mongol

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ghamilt1

PlanetFigure Supporter
Joined
Mar 13, 2005
Messages
1,573
Location
St. Albert, Alberta, Canada
Literally just finished this beauty from Pegaso. There was a tremendous amount of detail in this kit, and it took a long time, but I am very happy with the final product. I decided to put him in a wintery scene with snow, as it solved the problem of me not being very good at ground work, especially grass. I seem to have finally got the hang of the new camera as well, and hope that these pictures give you a better idea of the figure's true appearance. Anyway, feel free to weigh in.

Cheers; Glenn
DSCN0133.JPGDSCN0134.JPGDSCN0136.JPGDSCN0137.JPG
 
Thanks one and all for your kind comments and encouragement.
After looking at the figure this morning, I have a question of opinion on a technical matter;
I always spray a dull coat on my figures to give them that nice matt finish we all strive for, and it seems to do the trick nicely. One draw back in this case, is the metallics are not as "shiny" as they were, and I was wondering if I should brush on a glaze of gloss or semi gloss (on the metallic parts only) to bring the shine back. On the other hand, it does look pretty good now and I'm also wondering if this could be a classic case of "not knowing when you're finished" and I should simple walk away.
If you've had a similar experience I would value you're opinion. Again thanks for having a look.
 
Thanks one and all for your kind comments and encouragement.
After looking at the figure this morning, I have a question of opinion on a technical matter;
I always spray a dull coat on my figures to give them that nice matt finish we all strive for, and it seems to do the trick nicely. One draw back in this case, is the metallics are not as "shiny" as they were, and I was wondering if I should brush on a glaze of gloss or semi gloss (on the metallic parts only) to bring the shine back.

In a word - no!

To my eye, duplicating the individual surface finishes of each item on a model is one of the most important things a painter can do. The reason for using a dull top coat is to imitate the flat, dull appearance of cloth. Nothing spoils the look of cloth more than allowing a sheen (ANY sheen!) on cloth surfaces. It looks about as unrealistic as anything I can imagine.

But metal? On most uniforms, things like buttons, swords and the like are usually bright. Nothing looks less like lustrous metal than a flat dull surface finish. For skin and leather, a more "egg-shell" or semi-gloss sheen is appropriate. A modeler should think about these things while in the midst of the painting process - rather than as an afterthought.

What I do is paint all of the items that need a dull finish - clothing, for the most part - first. Then apply your dull coat if needed. Then you can proceed to the semi-gloss finished items and lastly, the metal stuff. I have never seen a metallic painted surface that looks good under coat of gloss clear paint. It immediately puts an intermediary surface finish between your eye and the metal powders that give metallic paint its metal-like luster. To my eye, it always looks less convincing than simply using a good quality metallic paint and leaving it alone.

It only takes a little bit of forethought during the painting process to avoid this kind of dilemma. And that is how I approach this problem. I hope that helps!

Mike
 
First one of these I've seen painted up (apart from the box art version) and it looks superb.

Rapturous applause!!

- Steve
 
Hi Derek, Ghengis McCann would be too fierce a character to be properly portrayed in miniature, and many thanks for the kind words. Thanks also Steve and Eduardo, for your generous praise. Special thanks Mike for sharing your expertise. Your advise makes a lot of sense to me and I will be incorporating this approach on future projects.
 
Back
Top