Rapid Prototyping Minifigures

[Gra30]

I must say, from a traditional sculptor producer, Andreas has helped so much in dipping my toe in this field.
If ever there was an expert to get advice from, I would say Andreas.
He covers all areas and is knowledge is vast.
A good man and his company is second to none in this field
Best wishes
Gra

 

[mandreas]

I have just a new 3d printer, there is a lot to learn, not as many believe "push a button and the object comes out" ,below my last 3d model printed ...

 

[vince wai]

I have just a new 3d printer, there is a lot to learn, not as many believe "push a button and the object comes out" ,below my last 3d model printed ...

View attachment 191398View attachment 191401 View attachment 191397View attachment 191399View attachment 191400

Mandreas ,

That's look real good, how long does it take to print the robot head out.

Shame that I had to make up for the furnace payment instead of the 3D printer, hope I can get one within a few month's time ( and at the meantime had get more illustration jobs and less time for fun sculpting )

You 2 Andreas ( mandrea and Andrea of Pathos ) are amazing!

vince

 

[mandreas]

Mandreas ,

That's look real good, how long does it take to print the robot head out.

Shame that I had to make up for the furnace payment instead of the 3D printer, hope I can get one within a few month's time ( and at the meantime had get more illustration jobs and less time for fun sculpting )

You 2 Andreas ( mandrea and Andrea of Pathos ) are amazing!

vince

Thank you very much Vince,
the printer asked 6.30 hours, 0.045 mm thick,
soon put in "cooking" the head of the "panzer commander" with resolution 0.015,
I'm sorry for the problems of your furnace, but I'm sure that if you want something (3d printing), you get it

 

[vince wai]

Thank you very much Vince,
the printer asked 6.30 hours, 0.045 mm thick,
soon put in "cooking" the head of the "panzer commander" with resolution 0.015,

Do you have to decimate the model a lot in order to get it printed and how many polygons for the panzer commander head?


vince

 

[mandreas]

Yes sure, I use decimator master, but it does not reduce the quality of the details .The head for example has 16000 polygons..(but have to check ...)

 

[mandreas]

head without media...
you must take time for finishing to remove the trace of the support, I guess the best choice for a model maker would be the "Soliscape", the object is not supported by arms, but by a biodegradable resin, but (there is always a but) it costs a leg (for a hobbyist), is noisy (if you do not have a lab, and you keep it in the apartment does not pass much that the neighbors covered you with tar and feathers) ...

 

[vince wai]

head without media...
but (there is always a but) it costs a leg (for a hobbyist).

View attachment 191677

But soliscape are mainly for wax model prepared for lost wax casting, is it? I am a bit lost with this vast output possibilities

I think clearing the support will not be a serious problem as I am just looking for a printer for casual hobby purpose and as long as the cost won't have my head decapitated

Do you need UV light for further curing of the printed resin model?

vince

 

[mandreas]

But soliscape are mainly for wax model prepared for lost wax casting, is it? I am a bit lost with this vast output possibilities

sure that it does not produce objects structurally usable, so not large series production but only prototypes, then if you uses them for foundry molds or silicone does not change much,

Do you need UV light for further curing of the printed resin model?

you can use a UV lamp, our good ebay offers; uv lamp for nail-fashion (not say it around though ), or sterilizer, for the moment I use the sun that is cheap

best
Andrea

 

[pokrad]

BTW: how does that resin from printer behaves ? Is it easy to cut and sand or is it tough and hard ?
I am thinking: supports are no problem as long as they are easy to cut off and sand properly...

 

[mandreas]

BTW: how does that resin from printer behaves ? Is it easy to cut and sand or is it tough and hard ?
I am thinking: supports are no problem as long as they are easy to cut off and sand properly...

the resin when "cured" is easy to work with the tools of the modelers, for the occasion, I printed a tool of my conception: Rhino 15 minutes, 1 hour of printing, just cut strips of sandpaper 15 mm wide and ... voila!



best
Andrea

 

[vince wai]

See also here with the level of details of the printed parts with Patho Miniatures Mad Jack.

http://www.planetfigure.com/threads...d-jack-churchill-1-10-bust.70755/#post-729670

vince

 

[mandreas]

See also here with the level of details of the printed parts with Patho Miniatures Mad Jack.

http://www.planetfigure.com/threads...d-jack-churchill-1-10-bust.70755/#post-729670

vince

Thanks Vince ,

Andreas of Phatos of Miniatures is really an expert in this art!

 

[mandreas]

the idea of printing a part insignia and decorations is great!

 

[mandreas]

But soliscape are mainly for wax model prepared for lost wax casting

I do not know exactly if they only use wax or unmergeable resin..

 

[vince wai]

Mandreas,

You 2 guys are sinful.
3D is not even sculpting and 3D printing is always lacking ......

And how dare you guys are showing what the technology can do at this point
Pretty much reminds me when people were saying to me that Photoshop is useless when I was painting with Photoshop version 1.0 20 years ago.

vince

 

[mandreas]

And how dare you guys are showing what the technology can do at this point

sure Vince !
concluding speech, professional machines can do even better: my model printed with DWS ...



Cya Andrea

 

[mash3d]

I have just a new 3d printer, there is a lot to learn, not as many believe "push a button and the object comes out" ,below my last 3d model printed ...

View attachment 191398View attachment 191401 View attachment 191397View attachment 191399View attachment 191400

Nice model and a great print. Just wondering which Printer are you using and what are you using to create the support structures?
Thanks,

 

[mandreas]

Nice model and a great print. Just wondering which Printer are you using and what are you using to create the support structures?

Thank mash 3d,
I took a Makex M-one, is equipped with a very good software for the generation of the supports,
(also automatically) but I position them manually one by one by studying the shape of the model,

best,
Andrea

 

[Veleran]

Mandreas and Pathos,if you take commissions is there any topic link for printing prices examples?Lets say-a 14 cm bust,a 7 cm bust or a 9 cm figure.
The models look nice and detailed.