The Doctor is in...

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Finh

Member
Joined
Apr 19, 2012
Messages
11
Created this for a friend who`s a massive fan of the series, Also working on a full body version, with K9 making an appearance...hopefully post that soon too.... if all goes well will look at the others
. DOCK-01.png
 
Thanks Warren, the full body figure is in the works.....as for size I`m open to suggestions. jumping between sizes takes a little work to make sure the detail is retained if going larger...but isn`t too much of a problem .I`m currently working on 120mm but can go either way.
DOCK2wip.PNGDOCKwip.PNG
 
150mm would allow a bit more detail in the paint work and would tie in with Airfix 1/12 Doctor Who models.

Mike
 
150mm should be an easy do, and like you say add those little details that add focus when painting...will keep that in mind.
 
There`s not too much difference between 120 and 150 so could potentially do both...maybe,;) all depends on what interest is there , if any. Will have to start looking into who to do next.....and start collecting the ref to be ready.

Whos next?
 
And not forgetting Roger Delgado's Master. I know he was pre-Tom Baker era, but such an iconic character and brilliantly played by Delgado.

That would be an interesting face to paint.:)

Michael
 
Back
Top