W.I.P. Il Fuedo 54mm Roman Centurion 110-105 BC

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

paulyrichard

A Fixture
Joined
Feb 20, 2007
Messages
602
Location
Electric Ladyland
I have this figure that i've jus' recently assembled in my spare time from my other WIP's, and thought that you guys may know who the sculptor is of it. I have checked out other old Il Fuedo figures and found that they're not as well sculpted as this little beauty, I was surprised.

Picture018-1.jpg


Picture014-1.jpg


Here I created a boss for the shield usin' a PzI headlamp turned upside down, styrene sheet, and liquid putty for the stud details.

Picture015-1.jpg


I also puttied and joined the gap in his strap due to the separate parts.

Picture017-1.jpg


...and i've drilled out the plant details on the base, 'cos I didn't like 'em and will make my own details down here.

Picture016-1.jpg
 
Hmm if my mind serves me well Andriano Laruccia have sculpted some pieces for them . And the pose and like looks like it couldhave been one of them . I am nit sure though, just a guess
 
Thanks, Verg'.

I got the armour painted on this, usin' Vallejo Green Gold alc-based metallics, then washed with Tamiya acrylic X-19 Smoke, thinned 50/ 50. This then had some complementary shadin' here and there with oil paint.

Picture051-1.jpg


Picture052-1.jpg
 
Thanks, dudes.

Pteruges, my god pteruges. Jus' what were they made of? Some say leather, some say layered and pressed linen jus' like the greek linothorax. Some say they were a fashion item, bein' that all romans were slave to fashion, other than the slaves that is!

Although, I personally think that the upper lappets were made of leather to stop the chafin' of the plate or cuirass armour......But then again they could be layered and compressed linen jus' like...the...linothorax......?!

Picture053-1.jpg


Picture054-1.jpg
 
This is where i'm at with this at the moment. I used Vallejo Off White, then shaded it. For the highlights I used some thinned Vallejo White and painted jus' the raised areas with jus' one solid highlight coat, then the borders of this paint were blended back in with Titanium White oil paint.

For me, this method is far better than havin' to wait days for the multiple coats of Titanium White oil paint needed for coverage, to dry. And ensures an instant result.

Picture0551-vi.jpg


Picture0561-vi.jpg
 
I've got most of the flesh painted in on this now. The only thing left is the face, which has jus' been shaded, and i'm waitin' for the oil paint to dry on this before I apply the highlights, otherwise it'll turn into a mess. The other parts of the flesh were different 'cos my highlights and shades are applied apart from each other, if ya' know what I mean.

For the shield, in which there is only suggestive sources, I came up with this scheme. In this very early Republican period it looked like shields never had any decoration. There is no hard and fast evidence either way, but the small amount of references I did come up with showed plain coloured shields. So there you go!

The shield will be weathered when I get the colours for the groundwork sorted out.

Picture070-1.jpg


Picture072-1.jpg


Picture071-1.jpg
 
Hi Paul

How different this now looks with the great paint job, you have made a fine job of this, the face turned out relly well:cool:

Cheers
Tommi
 

Latest posts

Back
Top