1812 Russian Unicorn Cannon Kit Review

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yeo_64

A Fixture
Joined
Oct 10, 2003
Messages
3,077
Location
Singapore
Hi guys !
This is a resin rendition of the 1809-1812 Unicorn cannon used by the Russians during the Napoleonic Wars. The creator of this fine kit is none other than Sergey Kulakov ([email protected]), a fine modeler in his own right. The master model of this particular work of art was first showcased on the "planet" by Zablov S. earlier this year. The moment I laid my eyes on it, I immediately knew I had to have one :eek: ! Well, after exchanging numerous e-mails with Sergey about payment and delivery of the kit (since this is the first time that he has sent anything to Singapore !), the kit finally arrived for me to get my "grubby paws" on :D !!!

The kit comes packed in a secure cardboard box with a scanned image of the completed cannon on the box top.

On opening the box, we find that the major parts of the cannon (barrel, wheels, gun carriage) are packed in a large plastic bag and the smaller items (cannon balls, wooden bucket, metal clamps for the wheels and gun barrel) in a separate zip-lock bag. The only instructions provided is a scanned schematic of the cannon in various views.

The resin used is a sand-colored and of excellent quality. Now here's the amazing bit about the kit- try as I might, I couldn't find any mold lines,air-bubbles or flash on any of the parts ! On top of which, in-spite of the long journey from Russia to Singapore, the only bits broken-off were a single hook on the gun carriage and the eye-ring for attaching the wooden bucket; all easily fixed with a little cyanoacrylate glue. There is molded detail all around the gun carriage and the cannon barrel even has tiny casting marks molded on ! Now that's what I call an excellent piece of casting work ;) !

The next pictures show the cannon put together temporarily without any glue involved. As can be noted, the fit is excellent to say the least. The only item that the modeler need fabricate on his own is the "rope" that suspends the wooden bucket to the front end of the gun carriage (easily made with some thin wire). In fact, it is a real feat of molding technology to note that the bucket handle is completely made of resin and molded on to the bucket. Note that this fragile item DID NOT BREAK while in transit to me :eek: !

All in all, I must say that this is an EXCELLENT first piece of work from Sergey and HIGHLY COMMENDABLE indeed. Any one interested in owning this beautiful model kit can contact Sergey directly via his e-mail above for a price quote and delivery costs. Now, where did I put my references for the uniforms of the Russian artillery crewmen :confused: ?
 

Attachments

  • DSC00140.JPG
    DSC00140.JPG
    135.9 KB
  • DSC00141.JPG
    DSC00141.JPG
    138.7 KB
  • DSC00142.JPG
    DSC00142.JPG
    167.3 KB
  • DSC00143.JPG
    DSC00143.JPG
    128.2 KB
  • DSC00144.JPG
    DSC00144.JPG
    153 KB
  • DSC00145.JPG
    DSC00145.JPG
    134.5 KB
  • DSC00146.JPG
    DSC00146.JPG
    65.8 KB
  • DSC00147.JPG
    DSC00147.JPG
    120.1 KB
  • DSC00149.JPG
    DSC00149.JPG
    128.6 KB
  • DSC00150.JPG
    DSC00150.JPG
    141.4 KB
OK I can take a hint

Hi Kenneth,

Great review and you lucky thing you, getting to build this kit. I wonder where your references are too?....:)


Rgds Vic
 
You haven't said what scale this comes in , lets hope its 54mm as there's a need for a good range of cannons in this scale . Mabye some one could produce a range from the medieval up to the American Civil , as there's an abundance of 2nd W.W and modern stuff but not much out there for earlier periods .

chippy
 
Hi Chippy !
Good news ! The Unicorn is in 54mm ! Cheers !
Kenneth :).

What does that mean scalewise? Because I learnt '54 mm' may be anything between 1/28 down to 1/35. If it's 1/32 it would be fine for me.
 
Hi je_touche !
It's 1/32 scale. Hope that helps you make up your mind on the usefulness of the kit. Cheers !
Kenneth.
 
That is a VERY nice piece indeed!
Lots of work in those fine wheels:eek:

I am a bit of an ancient artillery fan myself, having a soft spot for really early stuff.
Especially love the Elizabethan 'coffee pot' breach loaders and stubby mortars etc.

I also have real passion for wheelock's :D:D

I might consider producing the odd ancient artillery piece odd 54mm scale if there were sufficient interest too.

Anyhow I don't want to highjack yeo_64's thread about Sergey's excellent piece, so if anyone has an interest in these early pieces I would be glad to start another thread about the subject....




Mark
 
Back
Top