Far side

[david pickford]

Hello Fellas- I am an occasional visitor here only, mainly because I can't upload pics either at all or because they are too big when they do go up.
Also, it seems to me its mainly a place where people ( the elite ) showcase their commercial releases and get a pat on the back, rather than a space where bumbling amateurs can go to share their works, learn and get feedback. Contradict me if I'm wrong!

Now after making those controversial remarks and I am going to offer up some WIPs that aren't going to be released any time soon by anyone!!!!

the second one is John McEnroe in the 1980s

A special ops fig conversion...

the 3rd Steve Austin the 6 million dollar man.

The next, the penal battalion - HC at Euro and Silver Telford 2013

Then my 45 commando Yompers - Gold at Telford 2013

I paint if needs be. ( commended Telford 2013)

So this site should be my spiritual home?

 

[Tecumsea]

"rather than a space where bumbling amateurs can go to share their works, learn and get feedback. Contradict me if I'm wrong!"

Hello David, thank you for sharing your very nice work, unfortunate that you feel the way you do and perhaps if you were less of an occasional visitor you might regret having made the comment. There are areas of the forum for critique, brutal if requested, and areas for sharing completed work which is not to be subject to criticism. I think if you take time to look back over the forum you will see many instances of modellers sharing their techniques and giving advice on every aspect of modelling.

In the meantime, welcome to Planet, Congratulations on the awards, thank you for sharing your work and I hope you continue to do so in the future.

Keith

 

[Gra30]

Hello David,
Many of the people on here started as amateurs and all aspire to greater things.
Very nice work and hardly amateurish (I think you know that by your awards) particularly the Russians and yompers, bit insulting comments to the forum members though ref pat on backs and lack of help as the Elite on here are only too eager to help as are many and the commercial section is just for that. As said stick around and you will see, you certainly get back what you put in.
As said, nice work though both with a brush and sculpting, I like the Royal Marines very much

 

[Uruk-Hai]

You are wrong but welcome any way. I Think we have all kinds here.

Cheers
Janne Nilsson

 

[Barke02]

Hi David,

Don't forget everyone has to start as a bumbling amateur at some point - how could it be otherwise?

Don't fret about any 'elite', this hobby is far far too small. There are some very talented guys out there and they deserve all the praise they get, but we're not talking about the elite driving Bentley's around. This is a hobby and a passion , and even for most commercial companies merely a second income to the day job.

Regarding your photos, you need to reduce the image size in some way. You can do this using image editing software like 'Adobe Photoshop', however I am aware that this is expensive option (if you have a legal copy), and there may be other freeware avaliable, or slimline versions like 'Photoshop Elements'. There is an optimum size for displaying images on the web, which is completeley different from the images you download from your camera. The images from your camera are generally high resolution JPEG's, recording all the information from the digital sensors (sites). What you need to post on the internet is an image that contains enough information for the brain to make sense of it, but small enough not to slow the system down. A good example would be my avatar image (left). This has been reduced to a tiny thumbnail image which if you tried to enlarge it would be just a red blur. I'm sure there are others who could better explain this, but that's why it's better to jump in and be part of the community, and ask these kind of questions.

Great work so far, like that you're sculpting your own faces now....this is how everyone started.

All the best,
Jon.

 

[Colin_Fraser]

David - you will have to decide for yourself if this site is to be your spiritual home. From a modelling perspective, you could do a lot worse. I like your work and as others have said, its hardly beginner. You will get from it what you contribute IMO. Welcome.

Colin

 

[Ferris]

No need to feel insecure about your work, you've clearly passed the bumbling amateur stage. But even if you had not, the site has plenty to offer. I wouldn't know why you'd say it's for an elite? The skill range here is very wide. Comments tend to be on the nice side, but if you want it brutal, you can ask for it. There's some guys pissing sour grapes as well, don't worry.

Anyway, welcome, and hope to see more of your (very nice) work.

Cheers,
Adrian

 

[balder]

David, I disagree with you. I am by no means an elite painter. I have no problems posting my work. Criticism tends to be constructive here. There's a lot to learn here.
This is a very welcoming and inclusive forum.
Give it a chance and I hope you'll feel the way I do.
Gerald

 

[Ron Tamburrini]

There is a great bunch of guys here David all too eager to help some volunteered and some more shy but will help when asked ,as far as elite ! far from it this is an open forum
where everyone is welcome .
Also there is a bit of fun poked at one another at times mostly taken in good spirit ,there has been the odd fracas which can also be entertaining
There is a bit of back patting also ,but a heck of a lot constructive criticism also.
I have been here a couple of years now and watched modellers work improve piece by piece and hopefully including my own .

Stick around its the biggest modelling club in the world .
Ron

 

[kiwi45]

Welcome David, I'd have to say your work is far from bumbling,, I have myself been a planeteer for only a couple of years or so, I was an Armour modeller who did a few figs for the vehicles (still making some armour, slowly) It has been this site and some friends that has helped me progress in the figure scene to the effect of picking up a Commended medal at Euro recently, as for 'elite" I'd say rubbish, all the guys I've meet or had anything to do with in the figure/modelling are humble, friendly and don't hesitate to share their knowledge and any gatherings seem to be more about fun and friendship....so welcome aboard and hope you stay.
Les

 

[Martin64]

Welcome! Nice pieces - while I like your work I disagree with your assessment of PF based on occasional visits. You should take a closer look at the work of other members, their level(s) and the constructive criticism made when somebody asks for it. If somebody (amateur or pro) does not ask for it - what seems to be the case with you - he gets just the pat on the back. So here we go - very nice pieces (obviously above the level of a mere amateur - the medals earned second that) and once again welcome to the forum.
Cheers, Martin

 

[yeo_64]

I totally disagree with your opening statements in your post, David .
Why? Well, I started out as an Armour modeller and only had an occasional drabble in figures to crew my vehicle models .
One fateful day, though, I just happened to spot a painting that I absolutely had to reproduce in 3D.
I joined PF then as a total figure modelling newbie and, guess what, received so much help and encouragement from the good folks here that I now comfortably sculpt my own figures and animal models from whatever illustration that catches my fancy . In fact, it only took me a year to achieve full sculpting status .
So, you see, the "planet" is the place to be if figures (of all genres) is your game .
Welcome to the Planet, my dear friend .
By the way, Kudos on the posted models (I saw some of it in a couple of modelling magazines) .
Cheers!
Kenneth.

 

[gothicgeek]

Trollish first posts are hardly a way to get either amateurs or elites on your side!

You're wrong and I'd be happy to see you contribute to this place!

I await your response!

......

 

[carl reid]

There is nothing quite like starting off on the right foot Hey!!!

I have to totally disagree with your analysis of PF, I have made some tremendous friends on here, and in the modelling community in general! They are good people, who are always willing to help. your comments are way off the mark.

Carl

 

[Captain Sprout]

I find it a bit odd that you post about elites and then list every award you have won. Bumbling amateurs obviously have a massive trophy cabinet they are keen to fill. As an actual and genuine bumbling amateur, I must buy one. Good tip, thanks.

If you want to resize your pictures, there is an online photo editor that works well.

http://pixlr.com/editor/

I like PF as I can see new releases as well as good paint jobs..in our very small hobby, little companies and independent sculptors producing great kits need all the help and friendly publicity they can get in my view.

 

[Joe55]

I've learned a heck of a lot, and met some fine folks here. Glad to have you.

Joe

 

[Funky50]

I've learned a heck of a lot, and met some fine folks here. Glad to have you.

Joe

Cant Argue with that mate.....enjoy the site

 

[david pickford]

Hello Fellas, wow thanks for such a response. Apologies for the somewhat provocative nature of my post- I know I shouldn't - but I feel compelled! Thanks also for the (mainly) generous response...

Mind, its fair to say that the quality of the sculpting and painting and presence of 'big names' can be a tad intimidating over here! And its not just me who says that!

Some pointed out the rather contradictory nature of my statements - boastful and humble at the same time. Yep, that's me!

Now, thank you for you good guys who gave me techie tips on resizing photos- and I need to go away and sort that before I consider posting again coz my sculpting pics look s***e in that kind of magnification!!!!!!

A bientôt!

 

[dancap3286]

comments aside, I really dig the Russian penal colony figures. That is really interesting to me. Great stuff!

 

[Tecumsea]

HI David, I think it is te presence of the big names that gives this forum its credibility and pushes us all that little bit forward, we'll never catch up but hey it's fun to try, Glad to see you have taken the comments on board, I think you were always being a bit tongue in cheek

Take care............Keith