WIP Critique Spaniard

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Piotrec

A Fixture
Joined
Jan 23, 2009
Messages
805
Location
Raytown , MO
Hello everyone,

So I started this figure - great rendition of Maximus from Gladiator movie. BTW, one of my favorite movies of all time.

I have finished skin painting. This time I used oils. I think it is my third approach to paint flesh with oils. I still do not have 100% control over the medium, but I found it finally very rewarding when used for skin. I believe that I will stick with this medium for much, much longer for this type of job.

I am not very proud of this finish. Any feedback would be great, so I can improve next time when using oils for skin.

russell_01.jpg
russell_02.jpg
russell_03.jpg
 
Nice flesh tones Piotr.I've painted with oils for over 20 years and a good tip is when you've finished painting stick your oil mix in the freezer where it won't go off.I then use a wet on dry technique for reinforcing the highlights and shading,almost like using acrylics.
Brian
 
Nice flesh tones Piotr.I've painted with oils for over 20 years and a good tip is when you've finished painting stick your oil mix in the freezer where it won't go off.I then use a wet on dry technique for reinforcing the highlights and shading,almost like using acrylics.
Brian

This tip is damn handy!... I would never have thought of this!... Cheers.

What I really like about, 'Oil', paint, is there flexibility,. (drying time aside), the blending is second to none! (IMHO). 'Wet-on-Wet], or 'Wet- on-Dry' !...

Mark
 
Thanks guys. That is a great tip Brian. I will use it for sure.
The colors I used are: W&N Titanium White, Raw Sienna, Alizarin Crimson and Rembrant Cadmium Red Light, Viridian Green.
 
Thanks guys. That is a great tip Brian. I will use it for sure.
The colors I used are: W&N Titanium White, Raw Sienna, Alizarin Crimson and Rembrant Cadmium Red Light, Viridian Green.

Piotrec! .. .What range are you using? .. W/N, ' Winton' or 'Artist', I have just started using the Winton, range! .. although I am still a newbie to this range, I have noted a difference in both coverage and drying!

Mark
 
The, 'Artist', range is what I was used to!. and still use,.. (IMHO). the, 'Winton', range, offer less coverage, but quicker drying, however used in conjunction with each other! they do allow a more flexible approach! ..

These are purely my own observations,... it may be of help!

Regards,

Mark
 
I think Brian nailed it, your work is great, just fine tune it if you feel the need. I often go back with oils and retouch after a dull coat has sealed the initial paint job. The translucent properties allow for some really subtle fixes and adjustments by lightly feathering them in, almost a dry brush technique in a sense, but not exactly. I also will do a filter spread, like a thinned layer of oils to tint the finished areas. It works really well to refine the highlights or shadowed areas.

Take a few days away from it Piotrec and then go back and analyze it, see what's bothering you. It's got to be something simple, so give it some time and it will hit ya right up side the head and you'll wonder why you didn't catch it earlier. Happens to me all the time, comes with age Bro, lol.

Keep at it buddy, I'm likin it from here!

Cheers, Ski.

P.S. I've been using Winsor & Newton for ever, great stuff. Raw Unber, Burnt Umber, Titanium White as base colors and the entire spectrum to fine tune the rest. Don't give up on the oils, they are a blessing.
 
Back
Top