John Howard 75mm

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hugo Pereira

Hugo Pereira

A Fixture
Joined
Jan 15, 2015
Messages
2,164
Location
Portugal
Hello...

Ive the pleasure to annouce the first RPmodels full figure, 75mm... Major John Howard... And in progress, this figure will have 1/35 Scale...

1.jpg


2.jpg


3.jpg


4.jpg


5.jpg


Once again your help is fundamental... Without her, this figure dont be so great...

This figure will have a base, but it is in modelling right know... And of course, the have the perfect enviroment to the figure...

In this figure RPmodels try to put rage and strenght in the figure... Maj Howard have to conquer the bridge... But this isnt is a easy task... There are many people tell Maj. Howard is one of the Great Heroes od the D-Day... I hope you liked... All help is important to develop and improve this Great Hero...

Regards
Hugo Pereira
 
Hi
The gaiters are as everyone says are fastening on the wrong side ,but they are also very wide and should fit much tighter.
The Denison smock appears to be very tight also, the MKii smock was very baggy. the shoulder area and skirt especially look tight. The collar should have evidence of the zip and is just not big enough. I cant quite identify what is by his collar is it a beret or something tucked into his collar?
The glider troops badge is in the wrong position and if his arm was straight down the glider should appear to be in level flight, on you figure it would be nose down.
The helmet strap is very wrong, it fastens with a double ring and not a buckle, also the strap is more spoon shaped on that side, the chin cup is an integral part of the strap and not assembled in pieces as you have it. the helmet net needs looking at too, I think it looks un natural, it fastens with a draw string underneath, so you would see it, but not as it appears on the inner rim of the helmet.
The face veil scarf should appear as very fine square net but it looks like dots at the moment, not sure if that is deliberate or just the limits of the 3D rendering.
the 37 pattern web straps would be visible as well as the L straps for the small pack, that could do with looking at. Also the belt buckle is fastening back to front as I pointed out on the Lovat bust. On the rear of the belt you have the two buckles and above those you have two more, I`m not sure why you would do that, I suppose it would be possible to thread two spare buckles on to the cross straps but I cant see any purpose for that at all.
The Battledress trousers look a bit tubular and should taper a lot more from the seat to the knee.
The MKv sten looks nice! the ejection port is a little facing down though. This is a very bad way to hold a sten, they are notorious for jamming when held by the magazine, im not saying its wrong, you can do it! but its just not good , especially right on the end, nearer the magazine housing would be better but still not good, proper way is around the forend, the foregrip, or around the bridge of the trigger housing. I think a professional soldier would know better than to hold it that way. Can you change the hold on the weapon?
xx2o.jpg

xx1tr.jpg


excuse my criticisms I just hope it helps. :)
 
Hi Guys,

Thanks for the comment ref gaiters , webbing ,weapon position/ hold etc , the image shown is still 3D and will be corrected based on the great details given by you guys

Chemicalkenny ,

Can you post any pictures regarding the points you have raised please.

Cheers

Nap
 
napoleonpeart said:
Hi Guys,

Thanks for the comment ref gaiters , webbing ,weapon position/ hold etc , the image shown is still 3D and will be corrected based on the great details given by you guys

Chemicalkenny ,

Can you post any pictures regarding the points you have raised please.

Cheers

Nap
Click to expand...



Ref: my post, the picture show a 37 patt belt with the keepers, these are missing from the 3D sculpt.
 

Attachments

  • Canadian P37 1941 1a copy.jpg
    Canadian P37 1941 1a copy.jpg
    272.8 KB
  • Untitled howard.jpg
    Untitled howard.jpg
    255.6 KB
Hello Mr. Barrie...

In first place I want to ask appollogies for the delay answer... I already give instructions to change this mistake... In a few days you will see the figure in a good way...

Thank you for your comment...

With best regards
Hugo Pereira
 
Hello Mr. Chemicalkenny...

Once again, I want to ask appollogies for the delay answer... The Maj. Jonh Howard is changing magazine, and because of that his hand is on that... I already readed you comments, and I will pass to my people to improve... Your contibution, information and help allow RPmodels take conscious of the mistakes... So, we just can do one thing... IMPROVE... IMPROVE and IMPROVE... The most important is the final result will be outstanding, and this is the most important thing...

Thank you for everthing...
With best regards
Hugo Pereira
 
Hello Mr. Viking Bob...

In first place I want to ask appollogies for the delay answer... Thank you for all your help... I hope you liked the final result...

Thank you.
With best regards
Hugo Pereira
 
Hi Guys,

As Hugo says we are making all the changes including removing the badges on the smock as I am not 100% sure if they were ever put on by Oxs and Bucks ( the regimental museum have confirmed its very unlikely ) .

As Hugo says we at RP IMPROVE IMPROVE IMPROVE with every step ...with all and acting on all comments .

.....THANK YOU .

Nap

For those that don't know Hugo is a Dr often working long and difficult shifts so sometimes he will be delayed in replying ..please feel free to contact me as well on any matter
 
Hello Mr. Mike...

Thank YouTube for your comment... But in this moment, RPmodels do a big effort to produce in 75mm and 1/35... After that we will try another scales...

With best regardes
Hugo Pereira
 
Hi Hugo
yes I see ! Changing magazine.. O.K:)
If I were you I would take the finger from around the trigger and having it running straight alongside the trigger guard.
It will look more convincing, you see in the British army you are trained to never have your finger on the trigger unless you are firing the weapon, going through the process or easing springs. :)

Sometimes DZ patches and and specific branch patches were sewn on the Denison as well as qualifications such as glider pilot/pilot wings.
I doubt those badges were worn on a Denison, there again, unless you have access to Howards original Denison, written testament or an eye witness, who is to say?
He was the officer commanding so he could have sewn his name in huge white letters in the style of a football shirt on his back,.. unless you were there, you can`t say its wrong!
Good luck
 
Hi Chemicalkenny,

On behalf of Hugo thanks for the comments , we wanted Howard in the process of firing hence the finger location , as for the badges etc these have now been taken off with exception of the ID tab on his epaulettes and the rank .....obviously if he was in battle dress they would all be there!! We have put a beret tucked in the smock , showing a bit of beret colour and the Oxs and Bucks badge ( as in the bust which also has the relevant changes done)

I did send a message ref your help not sure if you got it but thanks as always.

Thanks for looking in

Nap
 

Similar threads

Hugo Pereira
Viking Last Stand in Stamford Bridge
2
Replies
38
Views
4K
oierlings
oierlings
Nap
Travelling to the Emerald Isle........Ireland ...to meet JOHN SCHLEY
Replies
3
Views
457
Billy Dickinson
Billy Dickinson
Hugo Pereira
75mm Ancient World Pirate Figure
Replies
12
Views
1K
Hugo Pereira
Hugo Pereira
Hugo Pereira
Medieval Knight XIV Century
2 3
Replies
42
Views
5K
Helm
Helm
Hugo Pereira
Guerrilas in Peninsular War
2
Replies
27
Views
3K
Hugo Pereira
Hugo Pereira

Latest posts

Back
Top