Briggsy
PlanetFigure Supporter
I agree, best do it in stages last thing you want is to snag something reaching in to place figures. Better safe than sorry in this case.
Cheers Simon
Cheers Simon
WIP Arnhem
- Thread starter Richie
- Start date
Help Support planetFigure:
Richie
A Fixture
Hi All,
Whilst I'm still off on my Christmas break I have been planning a few smaller vignettes to fit aound my larger dioramas. A trip to the North East Model Centre yon side of Durham secured the parts I needed.
I don't get much opportunity to visit such a place so it was a refreshing treat instead of ordering online. I picked up a few kits and some other bits I needed.
I wanted the Tamiya 1/35 Citreon CV11 and some Germans so I could make the Attack at Wolfgeze junction. General Friedrich Kussin and his batman Joseph Willeke ran into No.5 platoon B company 3rd Para. Their Citreon CV11 was riddled with sten and rifle bullets and is one of the iconic images taken at Arnhem. I may add a Para or two as there is one walking into the scene.
Not being from an AVF background I was given some great tips from my club mate Lester who is a renowned AVF modeller. The first piece of advice I applied was to spray vehicles in a matt black undercoat. Really apt for the Citreon as a lot were in black, requistisioned and repainted. The other advantage if any of the top coat is missed in an awkward spot then the black will act as a shadow or original paint..
Thanks for the advice mate.
I have riddled the car with bullet holes and flattened the tyres, the glass will be added at the end. I am also well on with the two figures and if the sculpting goes to plan they will be finished today.
cheers
Richie
Whilst I'm still off on my Christmas break I have been planning a few smaller vignettes to fit aound my larger dioramas. A trip to the North East Model Centre yon side of Durham secured the parts I needed.
I don't get much opportunity to visit such a place so it was a refreshing treat instead of ordering online. I picked up a few kits and some other bits I needed.
I wanted the Tamiya 1/35 Citreon CV11 and some Germans so I could make the Attack at Wolfgeze junction. General Friedrich Kussin and his batman Joseph Willeke ran into No.5 platoon B company 3rd Para. Their Citreon CV11 was riddled with sten and rifle bullets and is one of the iconic images taken at Arnhem. I may add a Para or two as there is one walking into the scene.
Not being from an AVF background I was given some great tips from my club mate Lester who is a renowned AVF modeller. The first piece of advice I applied was to spray vehicles in a matt black undercoat. Really apt for the Citreon as a lot were in black, requistisioned and repainted. The other advantage if any of the top coat is missed in an awkward spot then the black will act as a shadow or original paint..
Thanks for the advice mate.
I have riddled the car with bullet holes and flattened the tyres, the glass will be added at the end. I am also well on with the two figures and if the sculpting goes to plan they will be finished today.
cheers
Richie
Last edited by a moderator:
Briggsy
PlanetFigure Supporter
Good to see this is still on the go, nice new addition as well. I made this kit many years ago and really enjoyed it but it's long gone now unfortunately. I'll enjoy seeing this develop.
Cheers Simon
Cheers Simon
Merryweather
A Fixture
Great idea Richie. Looking forward to it
Henk
A Fixture
- Joined
- Jun 14, 2018
- Messages
- 1,503
Good start again Richie. I attempted a go at this, in my early model building days. Being short of funds (on account of only being in my early teens) and suitable models ( on account of living in a provincial village without a proper hobby model shop nearby), I made do with what I had....
I happened to have Airfix's Monty' Humber Staff car, which looked similar, and this was riddled with 'bullet holes' and substituted, and I think I used some Italeri Germans, crudely heated and bend into "shape"....
.
No incriminating evidence of this butchery remains...
Looking forward to seeing your progress, I've packed all my stuff away, as we are moving in the new year. I have just finished a Bronco 17 pounder, and procured a part build (cheap
) Morris C8, to convert to the Airborne version. Still to decide if I'm going for a large diorama of the landing grounds, or a smaller one in Oosterbeek.
I happened to have Airfix's Monty' Humber Staff car, which looked similar, and this was riddled with 'bullet holes' and substituted, and I think I used some Italeri Germans, crudely heated and bend into "shape"....
. No incriminating evidence of this butchery remains...
Looking forward to seeing your progress, I've packed all my stuff away, as we are moving in the new year. I have just finished a Bronco 17 pounder, and procured a part build (cheap
) Morris C8, to convert to the Airborne version. Still to decide if I'm going for a large diorama of the landing grounds, or a smaller one in Oosterbeek.
Steve Ski
PlanetFigure Supporter
Excellent, Richie. That car looks like a really good addition, but that tweaked leg might be a real hoot to reconstruct. Regardless, Ruck On!
Richie
A Fixture
Briggsy
PlanetFigure Supporter
That's an awkward pose but you pulled it off it looks great.
Cheers Simon
Cheers Simon
Merryweather
A Fixture
I agree 100%
Richie
A Fixture
Hi All,
Got the second figure done at last, also needed to address the roof headliner. The problem with with the inside headliner is, it shows the tooling locators and the Tamiya logo & copyright. So this needed to be sanded back and then a quick pour of Mr Surfacer to level it out.
Now just leaving to dry and harden so I can start Airbrushing the base coat.
Cheers Richie
Got the second figure done at last, also needed to address the roof headliner. The problem with with the inside headliner is, it shows the tooling locators and the Tamiya logo & copyright. So this needed to be sanded back and then a quick pour of Mr Surfacer to level it out.
Now just leaving to dry and harden so I can start Airbrushing the base coat.
Cheers Richie
Attachments
Briggsy
PlanetFigure Supporter
Good going, can't remember this particular issue when I did mine, but then gin tends to.have that effect on me!!!
Cheers 4
Cheers 4
Richie
A Fixture
Hi All,
Well this is my head up and over the barricade! This is the first time I have layered a top coat on a vehicle, I hope the base coat colours and pattern are somewhere close and you AVF lads don't laugh too much.
I have chipped just a couple of small areas to expose the black underneath and see what it looks like. The hard work of filters, detailing and weathering will begin after I lay down colours on the chassis.
Please feel free to critique as I have Para jeeps and XXX corps vehicles to do in the future.
cheers
Richie
Well this is my head up and over the barricade! This is the first time I have layered a top coat on a vehicle, I hope the base coat colours and pattern are somewhere close and you AVF lads don't laugh too much.
I have chipped just a couple of small areas to expose the black underneath and see what it looks like. The hard work of filters, detailing and weathering will begin after I lay down colours on the chassis.
Please feel free to critique as I have Para jeeps and XXX corps vehicles to do in the future.
cheers
Richie
Attachments
Last edited:
Briggsy
PlanetFigure Supporter
Looks good mate, better than my first attempt at airbrushing. Only thing I would suggest is maybe lower the pressure a little to avoid the spattering around the edges of the camouflage colours. Also practice on a piece of card before hitting the model just in case there is an issue, having to redo a vehicle after a cock up is so bloody frustrating! The Allied stuff should be easier as it's all just olive green of varying shades.
Cheers Simon
Cheers Simon
Henk
A Fixture
- Joined
- Jun 14, 2018
- Messages
- 1,503
Simon points out the two things that stood out. Lowering the pressure will stop the stippled look of the edges. The bonnet looks a bit odd, as if you've used a mask of sort. It also looks at some areas like you're paint was a bit thin, and applieed a little to heavy. I can add pointers to your photos, but I'll have to do that in a moment, when I have some time to edit the photos. I would not really bother with chipping, this was a General's Staff car, which would have been looked after. Overall it looks a good start.
Henk
A Fixture
- Joined
- Jun 14, 2018
- Messages
- 1,503
I'v done a quick attempt, but my computer keeps throwing up error messages when I try to edit the image in more detail..
1. This is what I meant with the 'mask' comment. The edges are to stark for a 'soft edge' camo, and the Dunkel Gelb to clean. If that makes sense?
2. The 'stippling' or spatter effect can be a few issues, as Simon mentioned, it can be to high a pressure, usually combined with too thick paint. It can also be paint drying at the tip of the needle.
You need to practice on a piece of card, or an old model. As you are doing camouflage on a 1/35 vehicle, you don't want to high a pressure, typically try 10 PSI, and keep thining the paint untill you get a smooth flow. You need very thin paint, and multiple, very thin layers, to build up the coverage. If you get 'spiderlegs' (sguigly lines running from the centre of the spot you are painting), you paint is to thin.
I tend to spary at 15psi, with my paint thinned about 2 to 3 parts thinner to paint. Sometimes even thinner, depending on how much coverage and transparency is needed.
What paints are you using, and what thinnirs?
What airbrush are you using?
1. This is what I meant with the 'mask' comment. The edges are to stark for a 'soft edge' camo, and the Dunkel Gelb to clean. If that makes sense?
2. The 'stippling' or spatter effect can be a few issues, as Simon mentioned, it can be to high a pressure, usually combined with too thick paint. It can also be paint drying at the tip of the needle.
You need to practice on a piece of card, or an old model. As you are doing camouflage on a 1/35 vehicle, you don't want to high a pressure, typically try 10 PSI, and keep thining the paint untill you get a smooth flow. You need very thin paint, and multiple, very thin layers, to build up the coverage. If you get 'spiderlegs' (sguigly lines running from the centre of the spot you are painting), you paint is to thin.
I tend to spary at 15psi, with my paint thinned about 2 to 3 parts thinner to paint. Sometimes even thinner, depending on how much coverage and transparency is needed.
What paints are you using, and what thinnirs?
What airbrush are you using?
