Completed Airfix 54mm French Line Infantry

[Nap]

Looking really good, don't spend too long on the DIY......

Agree there

They are all looking great

Looking forward to seeing more

Nap

 

[Waterlooman]

Looking Superb - each one special in their own right.

W.

 

[Merryweather]

Thanks everyone for those encouraging comments.
I am pleased to announce that Deuxieme Porte Aigle is done!
Here are the bits all painted and ready for assembly

And here's the finished article.
I must point out, for the benefit of those who haven't followed the thread from the beginning, that I didn't paint the standard myself. it was donated by @Daddio a very kind member of this forum. I would never have bothered even attempting it .

I have to say that after all the belly-aching and indecision with this guy I'm very pleased with him.
Thanks for sticking with me for all this time.
The officer is up next
cheers
Neil

 

[NigelR]

Good progress, he looks good.

I'm afraid the nerd in me wants to say there should be a gold ornamental trim round the edge of the flag, but it's probably too late to add that now

 

[DaddyO]

Lovin' what you've done there Neil

Great to see the standard got a suitable new home. Look forward to seeing how it all comes together

Paul

 

[Warren SMITH]

Excellent work..

 

[Oda]

Standing ovation on this whole project!

Oda.

 

[Merryweather]

Good progress, he looks good.

I'm afraid the nerd in me wants to say there should be a gold ornamental trim round the edge of the flag, but it's probably too late to add that now

And I'm afraid the coward in me didn't dare interfere with it!
But you're right, and I might just grow a pair and have a go

 

[NigelR]

And I'm afraid the coward in me didn't dare interfere with it!
But you're right, and I might just grow a pair and have a go

I get it. Maybe try a test section with oils on the least visible part of the flag to see if it works, if not you can clean it off before it dries.

But don't worry too much - it's the overall effect of the vignette you are going for. I'm coming to the same conclusion on my little vignette, I am trying to put too much detail into the individual figures which I realise isn't really needed.

 

[Merryweather]

Well, thanks to my 'friend' Nigel R I've been shamed into having a go at the fringe on the standard.
I wanted to be able to manipulate it realistically so I used lead foil

It was scary, but I think I got away with it

cheers
Neil

 

[Waterlooman]

Looking so nice - love that flag.

W.

 

[NigelR]

Well, thanks to my 'friend' Nigel R I've been shamed into having a go at the fringe on the standard.
I wanted to be able to manipulate it realistically so I used lead foil

That looks fantastic, excellent modelling work!

Now do you want the bad news........? I didn't mean the fringe, I meant the row of ornamentation around the inside edge of the flag on the 1815 pattern (number 3):

But seriously, don't bother adding any more. The gold fringe adds enough extra ornamentation to make the flag look impressive enough without the row of leaves around the edge of the flag

 

[Merryweather]

I know, but there's a limit, Nigel lol

 

[Nap]

Hi Neil.

Great updates and good work on the flag as well

Being me I would tone down the helmet with a wash ?

Thanks for sharing

Look forward to seeing more

Happy benchtime

Nap

 

[Merryweather]

I haven’t really been able to knuckle down to painting the next two figures yet, but I have been able to avoid the DIY by working on the casualties, Fusiliers 9 & 10.
This is where we left them;
Fusilier 9

Fusilier 10;

And here they are ready for paint to be flung
9

10

I've just noticed that I need to add the gaiter straps under the new boot soles.
I've 3D printed the shako and the musket, and the chinscales are separate pieces too.
time to have a go at the painting again.
thanks for looking in
Neil

 

[NigelR]

Great progress, I really like he second guy.

Question - is that thin solder/lead wire you use for the piping? It works really well.

 

[Merryweather]

Great progress, I really like he second guy.

Question - is that thin solder/lead wire you use for the piping? It works really well.

Thanks Nigel.
Yes it's 0.3mm solder. I have a range of thicknesses in 0.1mm increments from 0.2mm - 1.2mm.
I bought them years ago(not cheap, either) and with the tiny amounts I use they will last me for the rest of my life!
Sometimes wire is better, but the solder is very forgiving. You can flatten it easily as well if need be.

 

[NigelR]

Thanks Nigel.
Yes it's 0.3mm solder. I have a range of thicknesses in 0.1mm increments from 0.2mm - 1.2mm.
I bought them years ago(not cheap, either) and with the tiny amounts I use they will last me for the rest of my life!
Sometimes wire is better, but the solder is very forgiving. You can flatten it easily as well if need be.

Glad to hear it, I picked up some .2mm at the Bovington show at the weekend in the hope it was what you used. Someone also suggested flattening it to make straps and slings and you are right, it does flatten easily, I just tried it. Thanks for the tip on this one!

 

[Nap]

Hi Neil

Nice casualty work there , they certainly look right position way and good modelling

Look forward to seeing more on this project it's really moving along now

Happy benchtime

Nap

 

[Nap]

Glad to hear it, I picked up some .2mm at the Bovington show at the weekend in the hope it was what you used. Someone also suggested flattening it to make straps and slings and you are right, it does flatten easily, I just tried it. Thanks for the tip on this one!

These are well worth looking at ...Troutcatchers

https://www.troutcatchers.co.uk/about-us.htm



Nap